Issues with Mooer EXPLINE with Kemper

    Hey everyone,


    I recently bought a Mooer EXPLine micro pedal. Really cool pedal but it does not function well.

    The sweep is 0 to 100% most of the time(like it should), but sometimes the sweep ends at 90% on the Kemper (foot is at 100%) after a few seconds you can hear the Kemper corrects it up to 100%.

    (you know what I mean? I used the pitch effect)


    Anyone else got the Mooer without issues? Or do you know what the issue might be?


    Impedance of the Mooer is 10kohm. The Kemper manual states that it can handle 10kohm to 100kohm. So lost track :)


    Thanks!


    Ps. I know I need to buy a Mission effect. But this is what I got at the moment haha and it's a cool pedal

    Did you calibrate with the kpa?

    Have a look at the trs cable. Is the cable ok?


    I had this issue with a mission pedal and I changed the trs stereo patch cable which I used to connect the pedal with my remote and the problem was solved.

    Thanks guys, I will check my cable! I calibrated the pedal. And even in the calibration section is was clearly visable that it got stuck sometimes around 90%.


    I will first buy a new cable :)