phantom power for midi pedalboard

No, from all I know this is not available.

Cheers,
Markus

I built it for myself. Maybe it could be done by you too.

Kemper-Mod: 7-pin midi with power supply

Here's what I'm going to do: http://www.sweetwater.com/store/detail/RDMH900/ It lets you insert the power for the midi pedal remotely - at the other end of the cable.

[Blocked Image: http://www.sweetwater.com/images/items/750/RDMH900-large.jpg]

I'll attach the GCP wall wart ,with velcro, into the KPA's hollow back cavity to keep clutter down.

Then, I'll use something like this to power everything up:

[Blocked Image: http://i15.ebayimg.com/02/i/000/9f/71/f8da_1_b.JPG] 
That should solve it for me...until Kemper brings out their own phantom powered floorboard.

Quote from Dlaut

Here's what I'm going to do: http://www.sweetwater.com/store/detail/RDMH900/ It lets you insert the power for the midi pedal remotely - at the other end of the cable.

I'll attach the GCP wall wart ,with velcro, into the KPA's hollow back cavity to keep clutter down.

Then, I'll use something like this to power everything up:

That should solve it for me...until Kemper brings out their own phantom powered floorboard.

Display More

I use the same solution, works fine (power is in the rack anyway).

I use the Rocktron 5 to 7 pin midi cable with a Voodoo lab Ground Control Pro...

Works fine for changing patches...

Quote from Dlaut

Here's what I'm going to do: http://www.sweetwater.com/store/detail/RDMH900/ It lets you insert the power for the midi pedal remotely - at the other end of the cable.

[Blocked Image: http://www.sweetwater.com/images/items/750/RDMH900-large.jpg]

I'll attach the GCP wall wart ,with velcro, into the KPA's hollow back cavity to keep clutter down.

Then, I'll use something like this to power everything up:

[Blocked Image: http://i15.ebayimg.com/02/i/000/9f/71/f8da_1_b.JPG] 
That should solve it for me...until Kemper brings out their own phantom powered floorboard.

Display More

Hey, sorry for the thread resurrection, but where would I get one of those power cables w/two outs?

I found the power cable on ebay...it's called a "Y" cable. You'll have to scroll through a bunch of cables to find the proper type. I cut the 3-prong plug off one end and installed a receptacle I bought at Home Depot for the AC adapter for the GCP.