Hi All. I've got my KPA and FCB1010 ready to go. Just waiting for the UnO for Kemper chip to arrive. What type of midi cable do I need (amount of pins)? Any support for phantom power or will basic midi cables work. I'm thinking somewhere between 10 or 20 feet cables. Any recommendations? I am new to the world of midi controllers but very much need one for my cover band. We have several performances scheduled for this summer and I would like to be ready.
KPA/UnO for Kemper/FCB1010 Question
- gibson5413
- Closed
-
You need two normal 5-Pin midi cables. The length is up to you. 20 feet is fine
-
You need two normal 5-Pin midi cables. The length is up to you. 20 feet is fine
Thank you!! -
I believe you will need two MIDI cables for complete operation
-
2 cables???????? I only use one at the moment what functions would I gain from 2 cables
-
You need two for a full operation,otherwise some functions won't work(i guess it has something to do with the two way communication).If you see the faq and manual it's all explained there.
Im also a bit bummed about it,after all it's really three cables you have to plug(it also needs the power cord).But the pedalboard is cheap,and if you buy used it's even cheaper.
Im using this one until the oficial one from kemper is released(then maybe il keep it as a backup).
-
Is the manual on the UNO website. I'd like to see what functions the 2 cable option gives you
-
I think it's on the kemper Uno website,not the original Uno site(i don't remember the url now sorry).
-
Cheers ill take a look
-
You gain the use of the tuner on the FCB display and also the LED status for each stomp--so that if Stomp A is active the LED will light up for it for example.
J
-
Quick links
http://www.uno4kemper.com/UnOforKemper_manual.pdf SEE PAGE 8 Regarding the two mid cables neededhttp://www.behringer.com/assets/FCB1010_P0089_M_EN.pdf
http://www.uno4kemper.com/uno4kemper_order.php
-
Display More
Quick links
http://www.uno4kemper.com/UnOforKemper_manual.pdf SEE PAGE 8 Regarding the two mid cables neededhttp://www.behringer.com/assets/FCB1010_P0089_M_EN.pdf
http://www.uno4kemper.com/uno4kemper_order.php
Thanks Jerry
-
It would be liked at first left pedal wah to be useful at the second right pedal pitch.
What it is necessary to do how let him work?
I switched both effects on. (wah is work) -
It would be liked at first left pedal wah to be useful at the second right pedal pitch.
What it is necessary to do how let him work?
I switched both effects on. (wah is work)Try this go to System settings on the Kemper Page 6 top of screen engage VOL.PEDAL to WAH and PITCH PEDAL to WAH
I think now if you have wah and pitch in a rig both will work.
-
Is on both, and the pitch pedal is not working
-
I testing it now trying to figure it out.
-
Ok I'm stumped for now the VOL is not switching WAH like I thought it would.
The vol pedal stops doing anything
