go to the output menu and make sure that master mono is selected as the output source for the monitor output and that the volume level for the monitor output is raised.
If your cab is passive make sure it is connected to the speaker output.
Posts by Kemper Support #1
-
-
if you have a power rack and your cab is passive you should use the speaker output-that is the one with the red ring around it.
Using a passive cab with any of the other outputs is not recommended.SteveH beat me by a second!
-
When you activate the monitor cab off function it will also turn off the cab sim for the speaker output. The signal will always be mono though.
-
Überprüf bitte mal den Wert für die Aux In Funktion im Output menu. Signale die am Return anliegen werden automatisch am Main Out ausgegeben wenn Auxin/Main aufgedreht ist.
-
Wir verwenden bei den Factory Rigs nie die Originalnamen der geprofilten Amps.
-
We have a service center in Calgary.
To organise the repair you need to contact our support by email. -
There are no fuses in the Profiler. Any attempt to fix a problem yourself will void the warranty.
-
Der Master Volume Regler ist nur eine Fernbedienung mit der die Lautstärken der Outputs geregelt werden für die die Volume Link Funktion im Output Menü aktiviert ist. Vergleichbar mit dem Master Fader eines Mischpults. Wenn alle Kanalfader auf minimum stehen kannst du den Masterfader auf maximum stellen und hörst trotzdem nichts.
Stell entweder für alle Outputs im Output Menu des Profilers den gleichen Wert ein oder deaktivier den Volume Link für alle Outputs außer dem Monitor Output. Dann wird der Wert des Master Volume Reglers auch nicht mehr auf einer Skala von 0-10 angezeigt sondern in dB. -
If support has already diagnosed your case to be a hardware problem, posting about it in the forum will not help you to get it fixed. Have you tried to approach your dealer about getting a loaner while the Profiler is in repair?
-
Um ein Amp Profil aus einem anderen Rig zu verwenden muss man einfach im Amp Menu den Browse Regler drehen und die From Rigs Option anwählen. Dann werden alle Rigs aufgelistet und man kann das gewünschte Amp Profil laden.
Alternativ kann man auch einfach das Original Rig nach eigenen Vorstellungen verändern und dann mit der "Store as" Option unter einem neuen Namen speichern. -
Please send an email to [email protected]
-
das Legacy Rig Pack gibts auch einzeln im Downloadbereich unserer Webseite. Da sind die Rigs drin die früher Bestandteil der Factory Rigs waren.
-
Das liegt daran, dass die Rigs die du laden willst kein Bestandteil des aktuellen Factory Contents sind.
Wie man an die Rigs kommt hab ich weiter oben beschrieben. -
Alle ehemaligen Factory Rigs findest du im Legacy Rig Pack das auch Bestandteil der aktuellen Rig Manager Version ist.
-
The german forum is located in the private section. You need to register a serial number in your account to post in the private section.
-
use the git/stack option as the output source setting for the SPDIF out
-
stereo effects should be recorded on a stereo track to get the most out of them
-
It depends which type of signal you want to record.
The dry stack signal of the Profiler is mono. Only if you use any of the effects (X,MOD,Delay,Reverb) the signal turns into stereo. -
Have you already tried to use the "init globals" function on page one of the system menu? Maybe your output menu settings have been changed.
-
is a loop stomp activated in the rig and maybe even locked while no external effect is connected to the send and return?