Following the advice on my previous thread (Thanks Ingolf!), I have begun attempting to play around with stereo effects in the Kemper but I'm not getting how to set the effects parameters up correctly for stereo sound. I have connected two monitor speakers to the Mon Out and Direct Out outputs, set the Output routing parameters to Master Left and Master Right, and checked that the levels of the two outputs are the same. However, no matter where I set the Stereo and/or Mix parameters inside the Delay or Reverb blocks in my rig, I always get the same signal out of both speakers (ie. both wet or both dry). Connecting the monitors up to the Master Outs yields the same result.
What am I missing?