Hope you can help! My main performance is a set of three slots with the same profile of my favorite amp. However, the effects change based on the slot. It's basically this:
1 - Profile 1, clean, only reverb
2 - Profile 1, chorus, reverb
3 - Profile 1, green scream, reverb
There are other effects beneath the switches on the remote based on the activated slot, but I don't use 'em all that often.
Here's the thing. Slot 1 and 2 have a nice output volume. However, slot 3 has an output volume of at least -6 dB lower on peaks. I measured this by recording different stuff into Pro Tools. How can this be? Clean Sens and Dist Sens are all at 0 in all slots. All slots have the same Rig Volume setting (0 dB). In the amp section, the volume is at 0 dB in all slots.
It seems that when I deactivate the Green Scream in slot 3, the slot has the same volume as slot 1 and 2. Is this normal behavior? And how to compensate for it? I would have thought that a volume of 0 dB on the Green Scream would stand for unity gain but I might be wrong.