Celestions V-type
Beauty! One of my fav speakers.
That said, I am a fan of the imprints available.
Celestions V-type
Beauty! One of my fav speakers.
That said, I am a fan of the imprints available.
Nice! What is in the Palmer cabs?
Cheers - thanks for all the advice
No worries, enjoy the hunt!
Ok - understood. Thanks.
Question still remains - does the stereo sound make a bif difference to the rigs?
Yes, it can when using the right effects. Not so much with no effects except for more sonic coverage.
Stereo can be fun at home, but I found it had little value with my band.
Thanks for the reply dmathews, and forgive my ignornace but what do you mean by a seperate amp module?
If you use the Direct out as the right channel of stereo, you could take a guitar cable from that to a small amp like a Seymour Duncan Powerstage, TC BAM 200, or similar.
Then from there a speaker cable to a passive Kabinet.
Yes, it's more cables, but is a valid option.
You could also get another passive Kab and a separate amp module. The second Kab would use the Direct out as the right channel.
You could try the CABRIG Line/phones output. You would need a guitar cable, not a speaker cable.
Do not use the speaker output!
RIP Myles Goodwyn...
Good to hear. Hasn't disappointed me yet!
1- Yes. Use Monitor out for left, and Direct out for right to the Kabs. Use Main out left and right for the studio monitors.
2- You'll get stereo effects/ping pong delay etc. but you can't send different rigs/speakers left and right.
You can for sure do it, but it'll be a 2 step process... From the support site...
To upgrade PROFILER Head™, PROFILER PowerHead™, PROFILER Rack™, and PROFILER PowerRack™ via USB memory stick from OS versions before OS 7.3, OS 7.3.2 needs to be installed first! Older versions than OS 7.3 on these models don't recognize this new integrated OS revision. For this purpose OS 7.3.2 can be found on the Download Page at Older Software Versions.
Welcome, and enjoy!
thankls i did. waiting for response
Make sure to keep an eye on your spam/junk email folder
Display MoreMy latest build. Just finished this evening
Lovely!
Kemper has always been very timely with support.
Check your Spam/Junk email folder, sometimes it ends up in there.
I use (mostly) each performance as a single amp across all 5 slots.
I go from clean first slot to high gain in the 5th slot generally.
I keep the effects pretty much the same per performance.
This lets me choose a different guitar, and still able to find the right tone for it.
Another performance may have some ambient effects, and/or a different amp.
Seems to be the way I've settled in...
Check the output setting for Pwr Amp Boost.
thanks i will usde tghe link you sent me . and yes, the Kemper is connected through USB to my Mac and has the latest updates installed ( im prety sure. IM bad ewith computers and have been a Marshall user over 40 years. Im new to technology but when i hooked uo the USB, the Kemper seems to have updated itself which took quite a few minutes. Then the remote was intemittent. I weas told to buy a new cable and it was left up to me to determine if its the cable or the Remote itself . SO i spent. $50 which i lose, and this is to test to see if its the problem.. . Sometimes when i morph w the pedal (learned on video how to program) it is morphing but the display in ther rig manager doesnt go from red to blue, however the morph feature will still work . So i reboot , which takes like a minute, and then it usually brings the display back in coordination with the pedal. And the whole time the Rig Manager may lock up randomly, or loses my Kemper even though im on my 3rd usb connector and it works wit😳h every other device in my studio. So bottom line im wasting hours troubklew shooting instead of practicing for gigs and im getting frustrated and i just dont know what to do. Then i come here for solutions and get told i need to read manuals when the things that are happening are abnormals... So i, try t😳he lini and thanks. I really love the machine just wish i knew wha was wrong..
Understood mate. I'm sure support will assist in sorting out the issue!