PAN the KPA output on Right/Left side on Rig based

    I always liked this feature, since, expecially when you play with other guitarists, it can be very useful to PAN your guitar only on a PA side for a certain percentage amount.
    Just as example, do you want to recreate AC DC cover with 2 guitars panned left and right and then switch only for the solo in stereo mode?!??!?


    Well, from when the Kemper team released the Chromatic Pitch this is possible!!!!


    So, tweaking this effect, I find a simple way to do it... you have to put the Chromatic Pitch on X or MOD Effects slot with this settings:
    a) all the parameter to "0" including Voice1&2 Pitch,
    b) Stereo Parameter to +or-180°
    c) Voice Mix to +5 or -5 for full panned, anything in between for a percentage


    For the lazy people ;) here you can download and import the .kipr file to save the preset within your KPA Effects Presets :D


    https://dl.dropboxusercontent.…013-06-28%2000-56-12.kipr
    https://dl.dropboxusercontent.…013-06-28%2000-55-45.kipr


    See you next Tip :thumbup:


    P.S.
    Last, but not least, no delay or latency here, since the pitch shift is set to 0!!!

    Its sad, you can't do that pre amp, because it uses the both post fx slots, if you add two cromatic pitch shifters (left panned, and right panned) to switch between both.
    I want a similar setup, using the fcb with uno to enable one of the post-amp fx and mute one site.
    Anybody knows a better way to do this? I could imagine doing this with only one fx, and changing its parametes to toggle between left and right channel, but i'm not sure if the fcb can do that...