Long time I was waiting for this day. Happily just playing Kemper (rack) now. Ont thing - I have low volume on mains out, headphones are loud.
Hello again
Long time I was waiting for this day. Happily just playing Kemper (rack) now. Ont thing - I have low volume on mains out, headphones are loud.
Hello again
Hi and welcome. The headphones and main outs have their own separate volume. Press output button and you should see the seperate volumes. Hope this helps
Hi , welcome to the club:)
Pozdrowionka
Welcome!
Are the Main Outs connected to an amplifier?
Hi
Al volumes in OUTPUT section are 100%. While headphones are loud connected to Kemper or Focusrite Scarlett 18i8 output, the singnal coming through SPDIF and MAIN output seems to be quiter. Now I am connected Kempet main out -> Scarlett 18i8 analog ins (but with INST impedance) and from 18i8 outputs to (Marantz) amplifier and stereo speakers (JBL home stereo big speakers). I think I should move this thread to another section... When I disengage Hi-Z impedance on 18i8 inputs the signal is barely there...
Welcome!
Main or Monitor out at 100% should be very loud or drive your periphery very hard.
I like the Main Out to be tamed to -10 dB.
BE very careful, my friend, of loud headphones! Best way to permanently hurt your ears.
I did this, embarrassing as that is to admit, and have permanent ear damage. Test the dB to ensure you are listening safely.
After you figure out the volume parameters.
Welcome Poland! Glad to have you on the Team, zpetlic!!
Hello and welcome.
Greetings and welcome to the forum!
Welcome !!!
Ciao zpetlic, welcome
Hi zpetlic. I have a feeling that somewhere in all those connections, the gain staging has gone awry. Or perhaps your output levels from the i8i8 are too low. Check the mixer. You should have an option to change the outputs to +4 db or 0 db as they might be at -10 db, at least I have those options with my interface.