Yesterday night on the rehearsal, I noticed that there is a sound gap when I switch rigs in performance mode, using the Kemper Remote. It's quite annoying because it cuts off the sound before initiating the new sound, and there is like a one second gap. What can be the cause of this? Too many performances? Too many rigs?
Latency when switching rigs in Performance Mode - SOLVED
- FlyingSnowman
- Thread is marked as Resolved.
-
-
Yesterday night on the rehearsal, I noticed that there is a sound gap when I switch rigs in performance mode, using the Kemper Remote. It's quite annoying because it cuts off the sound before initiating the new sound, and there is like a one second gap. What can be the cause of this? Too many performances? Too many rigs?
Switching from the Remote should be instant.
Please send an email to [email protected] and include your backup. -
IIRC there is something like a "rig crossfade" in the rig or system menu. Did you check the settings? Could this be the reason?
-
What can be the cause of this?
Is it everytime or just at certain a position on the Remote.
I think of problems with the button of Remote. -
Switching from the Remote should be instant.
Please send an email to [email protected] and include your backup.OK, just sent you the mail. Thanks.
-
I have this exact same thing but without a remote. I've used a midi board and simple Boss footswitch and there's a delay in changing patches when in performance mode. Browse is fine though. I've seen numerous other posts about this here too.
-
I tried it yesterday night at home and had no problem. There could be several causes I think in my case:
- I didn't try all the performances, just one. I'll try it out on the rehearsal next week.
- external loop (device connected that doesn't switch fast enough?)
- power? since it's in another place I tried it, maybe there wasn't enough power compared to my place at home? -
I have this exact same thing but without a remote. I've used a midi board and simple Boss footswitch and there's a delay in changing patches when in performance mode. Browse is fine though. I've seen numerous other posts about this here too.
We are not aware of any threads related to switching time under current os release 3.2.1. Especially Performance Mode is using different approaches now, which are confirmed to ensure very short switching times. So first make sure, you are using current os.
Should you still experience issues under current os, check out if you can narrow in issue to particular Performances/Slots. Then open a support ticket including backup and description how to reproduce plus information how you switch (Remote, MIDI, analog switches directly connected, front panel).
-
We are not aware of any threads related to switching time under current os release 3.2.1. Especially Performance Mode is using different approaches now, which are confirmed to ensure very short switching times. So first make sure, you are using current os.
Should you still experience issues under current os, check out if you can narrow in issue to particular Performances/Slots. Then open a support ticket including backup and description how to reproduce plus information how you switch (Remote, MIDI, analog switches directly connected, front panel).
I can definitely confirm that I use the latest OS Release 3.2.1... I change performance presets with the Remote, nothing else. And I can definitely confirm that I had a latency problem during the rehearsal.
What I will do, is test all the Performances on the rehearsal next week, and update this thread afterwards with feedback on how it went.
-
i use the remote to switch in performance mode and its all very quick here
-
i use the remote to switch in performance mode and its all very quick here
Here in my place too, so I need to figure out why it didn't switch quickly on the rehearsal... -
Just wanted to let everybody know that the problem is completely gone now. Kemper support asked me to execute a procedure to restore the factory settings and then restore my newly made backup file. Everything works fine now!
-
Just wanted to let everybody know that the problem is completely gone now. Kemper support asked me to execute a procedure to restore the factory settings and then restore my newly made backup file. Everything works fine now!
Awesome news ...... Enjoy
-
Add a "solved" to the thread's title!
-
Just to know, how long was your latency?
I'm experiencing the same issue, in my case te switching time is very short, like 0,1 seconds, but is not instant and I notice it a lot when I have to change the sound to an exact pick atack when changing rigs.
Thanks.