Initial testing for using the KPA as a direct profiling solution with my Bogner Shiva 6L6. The goal was to accurately capture the Shiva's preamp section. If successful, this configuration would allow me to use the Shiva as a power amp/cabinet for the KPA.
Configuration: Guitar>KPA Input>KPA Direct Output>Shiva Input>Shiva FX Send>KPA Return>KPA Master Outputs>Logic. Recorded directly into Logic. No post processing used.
Clip posted on soundcloud...
http://soundcloud.com/johnny-n…/kemper-profiling-session
Clips are as follows:
(1st clip) Pre-profile, reference amp
(2nd clip) Post profile, reference amp
(3rd clip) Post profile, pre-refine KPA
(4th clip) Post profile, post-refine KPA
Findings/Notes:
1. Volume drop on passes 2-4.
2. Pre-refined result closer to original than post-refined, but still not acceptable.
Conclusion:
While an EXCELLENT solution for capturing exact mic'd cab tones, I don't believe it to be quite as capable when direct profiling. I hope future updates improve this ability.