Just did some recording using the kemper spdiff and the recorded tracks sound like they are clipping , the levels on the DAW are fine.i recorded the same track same rigs and settings through the XLR and they sound fine so what do I need to change to get the same sound through the spdiff
Spdiff sound clipping
- chick
- Closed
- Thread is marked as Resolved.
-
Does the recorded tracks have peaks at max (0 dBFS)? If they are in fact clipping, you need to lower the Volume on the rigs.
-
are you sure the SPDIF connection is properly synced?
the Profiler has to be Master.
-
Try going into the cabinet section and lowering the output volume.
-
Same Problem here since 2.32, Analog out ok, spdif distorts and have peaks
seems that there is more in level at the spdif -
I just switched off the kemper and then on and the sound is fine now so is this just somthing that happens regular
no. always worked fine here.
-
Same Problem here since 2.32, Analog out ok, spdif distorts and have peaks
seems that there is more in level at the spdifthere is a level parameter for the SPDIF that let's you attenuate the level, I like I said, I don't experience this issue.
can you make a backup and send it to support with a brief description, please?thanks.
-
Same Problem here since 2.32, Analog out ok, spdif distorts and have peaks
seems that there is more in level at the spdifIf a recording of the s/pdif output peaks, you're running too loud within the Kemper. If the analog out does not, it is because you've either attenuated the analog output or the soft clipping circuit is masking it.
