Currently doing that (4. outputs into one) works fine
Do you set the outputs to 9v or 12v?
Kemper player pedalboard ideas
- SevenHillz707
- Thread is marked as Resolved.
-
-
What are the specifications for the current doubler cables? Should be male-to-male I guess?
Display MoreSure
currently running that setup (Dingbat Tiny, Shure GLXDR16+, Dunlop DVP4 Mini)
I will most likely take off the DVP (and have it extra) when the Luminite Graviton M1 I ordered arrivies.
I might swap the SOL out with the DC7 then, depending how powering everything works.
This is my "vacation rig" and took it to Sweden over new year's (without the Dingbat at that time) and its very nice for that purpose.
-
What are the specifications for the current doubler cables? Should be male-to-male I guess?
If you DIY it yes and then you have 4 inputs on one side going all in parallel to one output. Or you buy 3 of their cables (my current setup, going to replace them with a custom one in the next few days though)
-
I bit the bullet and went DC7+Crux way. At least now I have the possibility to add other stuff to my board if needed + power the iPad from it
-
If you DIY it yes and then you have 4 inputs on one side going all in parallel to one output. Or you buy 3 of their cables (my current setup, going to replace them with a custom one in the next few days though)
Amazing, thanks once again!
-
All done
Metro 20, DVP5, KoT and Kemper
That's self explanatoryHad a mic stand lying around, so got me a K&M tablet holder and I have a nice 9,7" touchscreen for Kemper right in front of my arms
Guiitar is 2016 Les Paul Classic
Though with the money spent, I'm already close to a used Stage territory
-
Got the Sol + grip + cables today. Just need to get another flat cable to replace the green One and it’s
Done.
-
How do you use the Dunlop? More as a volume, or as a wah?
-
How do you use the Dunlop? More as a volume, or as a wah?
Exclusively as a wah
-
Here’s my setup. Loving this!
-
right now this one is love to know what’s the plan with power. I literally need to run the player, a power stage and a glxd16 so very similar to this setup
-
Display More
Maybe some stupid beginner questions belonging to pedals placed after the player.
The player has line level output. Pedals are meant for Guitar level signals.
Do these pedals nevertheless works with the player?
When I use pedals after the player I have to decide to put them after the XLR OR after the Monitor Out.
So this means that the FOH will have different sound as on stage/InEar Monitors/Headphones, right?
(just came into my mind: headphones will never get any after player effects
)I feel like this question got missed earlier in all the power supply discussion, but I'd be interested to hear the answers too. Anybody know?
I'm confused in general about how pedals would work if they come after the player. Does that mean they come after the delay and reverb in the player (if you're using those effects with the player)?
-
I feel like this question got missed earlier in all the power supply discussion, but I'd be interested to hear the answers too. Anybody know?
I'm confused in general about how pedals would work if they come after the player. Does that mean they come after the delay and reverb in the player (if you're using those effects with the player)?
Yes.
-
right now this one is love to know what’s the plan with power. I literally need to run the player, a power stage and a glxd16 so very similar to this setup
Hi - that's a lovely setup! I'm curious to know why you would need the Seymour Duncan Powerstage, when you can go from the Kemper Player into say the Kemper Kabinet. Is it because you are using an amp which is unpowered? Why not just use an amp that has power (like the Kabinet)? Thank you!
-
Hi - that's a lovely setup! I'm curious to know why you would need the Seymour Duncan Powerstage, when you can go from the Kemper Player into say the Kemper Kabinet. Is it because you are using an amp which is unpowered? Why not just use an amp that has power (like the Kabinet)? Thank you!
I had a Kemper 1X12 and it just did not cut it in my band situation. The 2X12 made all the difference.
-
I feel like this question got missed earlier in all the power supply discussion, but I'd be interested to hear the answers too. Anybody know?
I'm confused in general about how pedals would work if they come after the player. Does that mean they come after the delay and reverb in the player (if you're using those effects with the player)?
Thanks for bring this up again
-
So this is the setup I'm looking for. Something basic, and easy as I don't require much. I did have a few questions though:
1. Will the MXR DC Brick Power Supply power these pedals and Player? (https://www.sweetwater.com/sto…mxr-dc-brick-power-supply)
2. Can the Sub N' Up Pedal be used as a downtuner, not just Octaves?
Forgive my ignorance, I am still learning! Thank you for any input and tips!
PEDALS and PEDALBOARD:
1. TC Electronics Sub 'N' Up Mini Octaver Dual Octave Pedal
2. TC Electronics Polytune 3
3. Dunlap Volume Mini Pedal
4. Kemper Profile Player
5. Pedaltrain Metro16
POWER:
MXR DC Brick Power Supply
-
Why not the DVP5 instead of the Mini?
https://www.jimdunlop.com/volume-x-8-pedal/I have it on my metro and is perfect.
-
It looked like a tight squeeze on the m16. The mini seems to fit a little better, just my opinion
-
fair enough. Though I'm pretty happy I went with the DVP5 route
mini felt too mini for my bigfoot feet
