Hey guys,
the subject basically says it all. Would be nice if you could help me out or provide a thomann link.
Thank you in advance
What cable do I need to hook up the Behringer FCB with the KPA
- KoMa
- Closed
-
http://www.thomann.de/de/the_s…k366-5_blk_midi_kabel.htm
If you want to use the UnO4Kemper then 2 of those. Otherwise only 1.
-
Do I need a cable with all 5-pins connected? Or is 3-pins connected enough?
-
Do I need a cable with all 5-pins connected? Or is 3-pins connected enough?
I hadn't realised there were 3,5 and 7 pin options. I'd better check what I've got.
-
http://www.thomann.de/de/the_s…k366-5_blk_midi_kabel.htm
If you want to use the UnO4Kemper then 2 of those. Otherwise only 1.
Forgot to mention it, but yes I'll upgrade it with the uno chip.
Thanks for the link!
-
Just another question that crossed my mind, it'll take a few days till I order the chip. Is there somewhere a good tutorial or guide how to program the fcb with the KPA?!
Just read shortly through the manual.
-
Do I need a cable with all 5-pins connected? Or is 3-pins connected enough?
Midi Out: 3 Pins
Midi In: 2 Pins -
ll you need is regular MIDI cables , unless you are planning on doing a power supply mod and power the FCB1010 through the cable.
-
I should've stated that I want to know how to pgoram the fcb without the uno chip to work with the kpa. as far as I understand with the uno chip it's not a big deal.
Ok I see. Programming a stock KPA is a very tedious PITA procedure. Of you really want to do it you may want to d/l the FCB manual directly from Behringer.
-
ll you need is regular MIDI cables , unless you are planning on doing a power supply mod and power the FCB1010 through the cable.
Can this be done? I have avoided the FCB due to the A/C cord that plugs into the back. If it can be powered via midi I'll change my mind.
-
Can this be done? I have avoided the FCB due to the A/C cord that plugs into the back. If it can be powered via midi I'll change my mind.
I had one that worked, with a Line6 POD.. then sold everything some years ago.
I wonder (and just wrote in another forum thread) if the KPA could provide power supply to a modified FCB 1010 (via a full MIDI cable, with all the 5 pins connected).... -
I had one that worked, with a Line6 POD.. then sold everything some years ago.
I wonder (and just wrote in another forum thread) if the KPA could provide power supply to a modified FCB 1010 (via a full MIDI cable, with all the 5 pins connected)....Power via MIDI requires a 7 pin connection. The KPA does not deliver power over MIDI.
-
Will, You only need 5 pin cable, MIDI only takes 3 wires. There are mods on the Yahoo FCB1010/uno Forum. Paul
-
Will, You only need 5 pin cable, MIDI only takes 3 wires. There are mods on the Yahoo FCB1010/uno Forum. Paul
That would take care of things on the FCB side of the chain, but how would you get power from the Kemper to supply to the FCB?
-
Like I said someone here took a tap from inside the KPA to a powersupply mounted in the back. Not recomended if still under warranty. I'll try and find the thread here. you coulld probly make a short Y power cable to power a power adapter.
-
Power via MIDI requires a 7 pin connection. The KPA does not deliver power over MIDI.
Hi Will,
I understand that...I currently power my GCP that way. My question was: can the FCB operate with midi power?
