I attached my .kipr file in this post
Spring Reverb Demo
Posts by EL34
-
-
I'll do better than that, I'll attach it to this post
There are actually two verbs and some delay in this
You can turn off the delay and verb to get just the spring verb
Spring verb is in stomp B slotIn my demo tune, both verbs and delay were on
The only thing not on was stomp C which is a 1/2 step transpose
And Tremolo was not on which is Mod 2I am using Mojo Jazzmaster pickups
Guitar is set in the middle with both pickups on
The strings are actually really old
The guitar sounds even better with new stringsHave fun
-
Well Played SirLOL, good pic
-
I just had some time today to play with the spring reverb
I like it!I posted a demo tune here
-
8 inch cable from my wireless unit to the input jack
16 inch George-L cable from the wireless receiver to the Kemper
0 wire through the air from guitar to receiver
-
Thanks, I posted there also just now
-
I was happy to see the new spring reverb announcement
I was a bit late to the party, I should have checked in sooner
I am a big fan of Vintage Fender 6G15 Reverb unitsSo I was messing around with the new spring reverb today using a backing track I had
The backing track only had the drums, bass and vocalsI recorded all the guitar tracks on this backing track testing the new spring reverb
There's 4 tracks of my guitar on top, all with the Kemper spring reverb
Lots of splash and drip in my guitar partsIt's a fun Vintage tune made popular by Elvis called Little Sister
Here's the .mp3 link
-
I forgot mention that I like the new spring Reverb effect a bunch
-
I was happy to see the new spring reverb announcement
I was a bit late to the party, I should have checked in sooner
I am a big fan of Vintage Fender 6G15 Reverb unitsSo I was messing around with the new spring reverb today using a backing track I had
The backing track only had the drums, bass and vocalsI recorded all the guitar tracks on this backing track testing the new spring reverb
There's 4 tracks of my guitar on top, all with the Kemper spring reverb
Lots of splash and drip on my guitar partsIt's a fun Vintage tune made popular by Elvis called Little Sister
Here's the .mp3 link
https://el34world.com/Misc/Music/files/LittleSister.mp3
EDIT: I attached the .kipr file to this post
See post 7 below for notes about this -
I don't ever try to get exact tones
Usually while browsing the library, I will hear something that reminds me of a certain player
It may not be the same, it just reminds me in some way of a certain guitar soundI will download that profile, tweak it a bit, and call it good enough.
The tone is more in the players hands than the actual amp sound
But, it does sound better to get a sound that is somewhere in the same neighborhood. -
Thanks for the link.
What a huge time saver this is saving groups of effects and stomp boxes -
Moving the pedal down to increase gain or increase other setting in the morph is counter intuitive
I have set up profiles that way but did not like itI was hoping to be able to send midi value of 127 to trigger the profile into maximum morph state as I call up the profile via midi
I can force the morph to go full on if I send a midi CC11 a value of 127 after I have called up the morph profile
The problem is, I can't do it at the same time the profile is called up
-
CC 11 is the Morph pedal in the Kemper
I have an expression pedal set up to control Morphing in several profiles
I have the expression pedal set for CC11 (morph pedal) and it sends Midi value 0 on heal down and midi value 127 on toe down, and every value in between when moving
The Morph is changing several things at once like treble and gain when you rock the expression pedalWhen I use the expression pedal, the morphing works great in the Kemper
I can watch a Midi message screen and the expression pedal is sending from 0 to 127 when you move it heal down to toe downThe problem is that when I change to a profile via midi, the morph is set to it's lowest value in the Kemper
That means that the morph gain setting is at it's lowest value
I want the gain to be at the max value of midi 127 when I select a profile via midi
So I am sending CC 11 a value of 127 when a profile is selected via midiExample:
When I call up Program change 7 (see my screen shot), I also send CC 11 a value of 127 which should make the Morph go to full on
I am watching the midi messages as they are being transmitted and CC 11 is being sent a value of 127
But the morph value is not changing when you watch it on the Kemper screen
It shows a morph value of 127, but the black bar is still set to zero
Page 5/18 in the system menu screen shows exactly what is happening as you send these midi commands (see my screen shot)Look at my screen shot of the Kemper midi screen
Top half of screen shot
Lower left shows the morph pedal is set to 127, but it isn't
Look at the black morph bar, it is empty and set to zero
This is when I send CC 11 a value of 127 at the same time I select a profile via midiLower half of screen shot
Lower left shows the morph pedal is set to 127, and the black bar is also set to 127
Look at the black morph bar, it is full and set to 127
This is the exp pedal going toe down sending CC11 a value of 127
Note that CC #7, volume pedal is set just like the morph and it responds correctly on the Kemper screenNote that all the other midi functions work properly
Volume, Wah and Pitch all respond correctly when I send midi values when selecting a profile via midiThe morph pedal is the only one that does not respond correctly
This has been like this since Morphing came out
I have updated the OS 3 times since then and it does this in every OS so farI also attached a screen shot of the midi values being sent when I select a profile via midi
In that screen shot, I set CC 11 to toggle between a value of 50 and 127 so I could watch what happens in the Kemper
Also note that volume, CC7 is also set to toggle between 50 and 127 as a test, and the Kemper responded correctly -
I was able to send your .syx to my uno 1.0.2.e FCB1010, no problem
Then I was able to get a patch dump and compare what I received to what I sent
Both send and receive files matched
I am not sure you have your settings correct
You don't need to set CNT1 and CNT2 for every preset
You have already set your stomp boxes at the top of the screen
See my screen shot - No need for the red X sectionTry the .syx file I attached to this post and see what happens
-
Attach it as a .zip file
In windows
Right click on the file and choose
Send To Compressed (zipped) folder -
I can test your .syx file here and see what is going on
Can you attach your .syx file?
-
Try setting the global setting in ripwerx to look like this just as a test
[Blocked Image: http://el34world.com//Misc/Music/images/ripwerx33.gif]
Make sure your FCB1010 is set up for hand off sysex sendind
Look at the setup here
Receive sysex enable Procedure
http://el34world.com/Misc/Musi…1010_making_uno_ready.pdf -
Go to my FCB1010 UNo page here and make sure your FCB is set up correctly
http://el34world.com/Misc/Music/FCB_Kemper1.htmThose midi commands you are showing are not what the preset pedals should be sending to change the Kemper profiles
You should see program Change numbers being sent like in the screen shot below
It looks as though your FCB is in one of the Global programming modes and not normal mode?
[Blocked Image: http://el34world.com/Misc/Music/images/ripwerx27.gif]
-
I added some more goodies to the tutorial page today
How to step up or down one profile at a time with the FCB1010
Also, how to control the Kemper gain knob with a FCB1010 expression pedal
http://el34world.com/Misc/Music/FCB_Kemper1.htmI was also working on performance mode with the FCB1010
I got performance mode working but I don't have any info posted on the yet -
Use the Ripwerx software I link on this page and look at what the FCB is actually transmitting over Midi
http://el34world.com/Misc/Music/FCB_Kemper1.htmTake a screen shot of the Midi Watch window in Ripwerx
That way we can see exactly what the FCB1010 is sending