Cheers again Tim.
Have amps, will profile the BE100: Lets make some profiles...
-
-
Thank you, Tim!
-
Thank you for these!
BTW, the link for the "Avatar 212 M75 IR.wav" appears to be broken.
-
Thank you!
-
thank you.
-
Thank you for these!
BTW, the link for the "Avatar 212 M75 IR.wav" appears to be broken.
The cab IR is in the same folder as the profiles, but here is a direct link if anyone just wants the IR: https://www.dropbox.com/s/y8etfpqejm52hap/Avatar 212 M75 IR.wav?dl=0 -
The cab IR is in the same folder as the profiles, but here is a direct link if anyone just wants the IR: https://www.dropbox.com/s/y8etfpqejm52hap/Avatar 212 M75 IR.wav?dl=0It says, "Audio Error" or something like that when you click on it but I just noticed the download box in the upper right hand corner. Got it now. Thanks!
-
HAWP-53 update:
I liked the cab/speaker/mic combination so I thought I'd profile the BE100 with the same exact cab setup. The profiles are located in the same DropBox folder and the Readme.txt has been updated. The BE files are of the BE channel and the HBE files are of the HBE channel. The files are here if you want to check them out: https://www.dropbox.com/sh/fj1…JeWAvfWdCVwziRfT6dYa?dl=0
-
Thank you!
-
Hey Tim, where can I get the smallbox DA profiles as well as the dirty shirley DA profiles? I want to compare the merged profile with the DA profile on my cab and make some analysis on some things...I can PM you my email if you would like if that's easier. Thanks for all you do.
-
-
Thank you!
-
Tim's the Energizer Bunny™
Way to go mate; thank you.
-
Hi.
two questions about Mastodon's Bill Kelliher rig (source: http://www.premierguitar.com/a…g-rundown-mastodon-2014):
- is the lower amp a HBE, it seems to be missing switches?
("His second amp is a 100-watt Friedman HBE that slams 30-watt Celestions in an Orange 4x12.")
- have these settings already been profiled?
[Blocked Image: http://www.premierguitar.com/ext/resources/images/content/2014_11/Rig-Rundowns/Mastodon/Kelliher-Amps-WEB.jpg] -
Awesome, Tim, awesome job.
-
Hi.
two questions about Mastodon's Bill Kelliher rig (source: http://www.premierguitar.com/a…g-rundown-mastodon-2014):
- is the lower amp a HBE, it seems to be missing switches?
("His second amp is a 100-watt Friedman HBE that slams 30-watt Celestions in an Orange 4x12.")
- have these settings already been profiled?
[Blocked Image: http://www.premierguitar.com/ext/resources/images/content/2014_11/Rig-Rundowns/Mastodon/Kelliher-Amps-WEB.jpg]HAWP-54 profiles are up.
From my brief research this is a version-1 amp, mine is a version-2 amp. There were more little changes made to the amp throughout the years but the amps are all supposed to sound the same, The changes added features and reduced noise. From the photo it looks like he is plugged into the HBE channel, the other input would be the BE channel. The switch on the front should be the voice switch, the FAT, SAT and C45 switches should be on the back of the amp if the amp has those switches. Since we can't see the back of the amp I profiled the amp with the FAT, SAT and C45 off, and then with the C45 on, and then with the SAT on, and then with both the C45 and SAT on. I'm assuming that he didn't use the FAT switch.
I don't think we have tried these settings yet, certainly not with the master volume so high, so I thought it would be worth a try to profile the amp with these settings.
First, it was incredibly loud, it was so loud that I could hear the speakers breaking up and the amp was sliding off of the cab, see the photos in DropBox.
The first profiles went find but as soon as I turned the C45 switch on the profiler said that the amp was too noisy so I had to turn the gain down a little.
This was an interesting profiling session, even with earplugs my ears got burnt out after only an hour of profiling
The profiles can be found here: https://www.dropbox.com/sh/vx3…xrkmY5sf-xqg7ckmiwHa?dl=0
-
Thank you!
-
Thank you, Tim!
-
-
awesome!
great work!
thank you