It it would be good for official confirmation of 'do we need to do it if 3.1.0 worked'? In other words, is this *just* for people with a failed upgrade or should those whose upgrades work still do it?
3.1.1 fixed "just that one bug". Apart of that, there is no difference. Anyway, to bring everyone to the same level, I would suggest to update.
should those whose upgrades work still do it?
Here's the answer from the 3.1.1 announcement. 
Quote from BurkhardSo people who are interested to test Public Beta os should install this latest revision!
I think it's always good practice in a beta test to use the latest version.
Aside from the Browse mode bug I also got errors in Performance mode. When I first select a Slot in a different Performance with my midi controller the tone is muddied, most noticeable in higher gain rigs. This happens with Pure Cab on or off. I reinstalled 3.0.2 and the problem went away, when I reinstalled 3.1.1 it came back. Gone back to 3.0.2 for now, too much to work on. Cheers!
Has anyone noticed this? In performance mode, when I want to copy/paste a rig,it will paste it but the paste button stays lit. Before 3.1.1, after pressing paste, that light would shut off. The copy light only lights on the first press if that makes sense. No matter how many rigs I scroll through and copy paste other rigs, the paste light does not shut off so it's hard to know which rig was actually copied.
Yes it will paste the same rig again if you don't press copy. The problem is if I want to copy a different rig to paste, the copy light doesn't come on while the paste light stays lit. It wasn't like that before the update.
the copy light doesn't come on while the paste light stays lit.
If you press "Exit", does the light go out?
If not, I suggest reporting this as a bug.
Yes it will paste the same rig again if you don't press copy. The problem is if I want to copy a different rig to paste, the copy light doesn't come on while the paste light stays lit. It wasn't like that before the update.
I remember Timo talking about a persistent copy/paste to address some issues users were having with performance mode. This may be what he was talking about implementing, but maybe it is a little bit buggy?
Just to confirm.
The Browse mode bug using a Midi pedalboard is not fixed in this update...correct?
Just to confirm.
The Browse mode bug using a Midi pedalboard is not fixed in this update...correct?
Correct
Ugh, running the latest beta and a Remote - the LCD display on the remote screws up like you have the setting too low. If you adjust the display on the LCD with either the control on the remote or through the Kemper Profiler itself, it reverts back within less than a minute.
Remote reset twice at a gig, then was ok other than the display issue above. Anyone else having trouble with Remote and the latest version?
I've put the firmware back to last version (3.0.2) and the display is fine again. Reinstalled the latest beta - and it screws up again.
Pete
I've not noticed anything with mine, but then I only had it on for about an half hour yesterday. It took a long time to start up, though. First updating firmware, resetting, then updating resources. Did yours go through that process?
Makes complete sense now that we can adjust performances around in the RE.........
If we could get an overall volume leveler ( that I've talked about too many times before ) in Performance mode it would make my night to night Set List adjustment life almost complete
If we could get an overall volume leveler ( that I've talked about too many times before ) in Performance mode it would make my night to night.
I'm looking for that too!!
If you press "Exit", does the light go out?
If not, I suggest reporting this as a bug.
no the light does not go out. I'll check it again today.
<p>
Display MoreUgh, running the latest beta and a Remote - the LCD display on the remote screws up like you have the setting too low. If you adjust the display on the LCD with either the control on the remote or through the Kemper Profiler itself, it reverts back within less than a minute.</p>
<p>Remote reset twice at a gig, then was ok other than the display issue above. Anyone else having trouble with Remote and the latest version?</p>
<p>I've put the firmware back to last version (3.0.2) and the display is fine again. Reinstalled the latest beta - and it screws up again.</p>
<p>Pete
</p>
Pete....did you have the remote connected when you updated the firmware? I did that once before and I had issues. I always disconnect the remote now and then when the firmware is done installing and the kpa is back online, I plug it in. Just a thought
I always disconnect the remote now and then when the firmware is done installing and the kpa is back online, I plug it in
Never tried that so far. How about the update of the Remote software? Will it automatically update once you connect it after the KAOS update?
I always keep it connected so the update process can update Profiler AND Remote, that's why I'm asking.
Most of the time I connect my Remote after the update, for convenience reasons.
I didn't have a failure so far.
Most of the time I connect my Remote after the update, for convenience reasons.
I didn't have a failure so far.
I've always done it the other way with the remote connect all the time. I've never had an issue
There ya go! 
How about the update of the Remote software? Will it automatically update once you connect it after the KAOS update?
Yes. I did the last update this way. The Remote updated when it connected. I noticed it was taking a while to start up and saw that it was updating its firmware.
