If your outputs go to a mixer or interface then you have left/right balance if you need them. The same goes for outputs to PA or Studio Monitors. I'm trying to see a reason why you ask but I'm lost. 
If your outputs go to a mixer or interface then you have left/right balance if you need them. The same goes for outputs to PA or Studio Monitors. I'm trying to see a reason why you ask but I'm lost.
sometimes you need to have controls of left/right pan.
Even my old pod x3 live had it….
sometimes you need to have controls of left/right pan.
Even my old pod x3 live had it….
that is the purpose of the Panorama parameter in the rig menu
that is the purpose of the Panorama parameter in the rig menu
Except that Panorama does not save globally and you cannot Lock it. It would be great if we could get a Left/Right balance control on the Output block.
Thank you.
Except that Panorama does not save globally and you cannot Lock it. It would be great if we could get a Left/Right balance control on the Output block.
Thank you.
What would be the intended application of such a feature?
What would be the intended application of such a feature?
To allow the functionality directly from the Kemper, to adjust the balance to Monitors, PA speakers, etc. without the need for a mixer or having to walk up and back to the speakers. If it was in the Output block it would be globally set.
Other leading brands already easily allow for this.
Fractal:
[Blocked Image: https://i.imgur.com/yiCMGva.png]
Helix:
+1
And yes, why Rig section don't have lock? Need also add this feature
If you have an imbalance out of the Kemper it would likely be a bad connection. If a pan was needed it would usually be per rig, which is already possible.
I know you want to control directly from the unit, but what would be the reason for globally panning a Kemper?
I understand the "WHAT" (and that some competitors have done it) but i don't catch the "WHY" ?!
