I think I tried uploading a cab IR to my Kemper once but via the USB cable from my iMac....
The IR was a 48Khz though and I think the Kemper only accepts 44.1 ...
If anyone knows how to translate a 48 IR to 44.1 - I'd be grateful to hear from you...!
There are many threads on the subject of the Beta FW and the new features. A good place to start would be the official announcements forum.
So sorry, but, where is that..?
Thanks
EDIT: think I've found it - would that be the 'Private Forum', specifically "announcements from Kemper" -- I hadn't even noticed this part of the forum!!! Apologies !
The beta is available if you just can't wait.
Is there?! I thought I saw something, somewhere...! Does anyone know what's included in the current
beta and is it risky in any way then 
?!
Cheers
5 months now....!
Gotta say could do with the upgrades! (RM, external footswitches for the remote, and fingers crossed; effects!)
Would be nice! But they are too pricey and basically never appear on the second-hand market in the UK....!
Actually, I believe linearity is the most expensive characteristic to be rendered in an electronic device...
Well of course; when it gets to certain degrees it would become more and more difficult to achieve, therefore pushing the price to achieve up.
I'm of course talking 'within reason' though, -- the cheapest possible second-hand DXR or DSR for example.
Dunlop (DVP3) Volume (X)
Cheers. Any idea how it compares to the EB VP JR?? Mine doesn't seem that smooth with vol swells....
I'm just looking for something cheap & reliable yet accurate that I can step all over haha.... Smaller and lighter the better though!
EDIT: oh and has to be 'wedge'-designed ideally so it can sit on the floor in the "monitor wedge" position (as opposed to upright PA speaker positon...) so ideally rubber feet on the bottom on the long side & short sides ..
I've had all 3 - use the Dunlop. It has the best feel (when you can afford it) and, unlike the Mission, the plug goes out the top, not the side, which is really dumb. The Moog is fine, just kind of plasticky. Can't beat the price though. Enjoy!
Which model Dunlop are you using? cheers
I think any decent active PA speaker will get you a long way ...
I went with the Camper 112 Plus passive FRFR cab from kpa-solutions.com - it is a passive full range cab that looks like a regular 112 guitar can, but it is FRFR. I have a pair of those, and shipping was a few days
Thanks! I'll look into that one...
What's the general opinion on these: Mackie SRM-350 V2 (and how do they compare to DXR / DSRs?)
cheers
I'm thinking I could route the SPDIF to my interface and then out from there TRS - XLR to the Kemper Return Input to profile.... Would this work?!
Thanks in advance for any insights / thoughts.
I've got a Radial RMP box (light blue) - can't remember if it has a phase switch on it and a Lehle Dual SGOS, which deffo has a phase switch on it - don't know why I didn't think of that! (I use it like you stated, to split my guitar signal to 2 amps and blend them for a fatter sound.
Found the solution in another post:
Transpose in Stomp X = big lag
Transpose in Stomp A = NO lag
Just tried this and it works!
Didn't think I was experiencing latency -- I had it in stomps all along (you want your tuning changed before it hits the rest of the signal chain/processing in most circumstances...would have thought this would have been obvious...)
Dang.
How do you change the author name of your Kemper then?! Thanks in advance!
Best way I can think of is what you've already done with a delay in the signal path of the faster signal...
I too would be intrigued to achieve fatter live sounds (if there is a way without additional gear requirements ideally!) 
EDIT: I don't think it would be possible to achieve within the Kemper (as any signal you send from the Main Outs is the same signal going to the cab and then onto the mic to the FOH... So physically that second signal takes longer as it has to move the air from the speaker to the mic whereas the main outs are just sending electrons immediately... Delay in-line or if there is some sort of phase treatment at the FOH end are only things I thing would work for this issue)
I liked the 'halo' coloured lights around the switches of the G system...
Wish the Kemper remote had those and scribble strips!!
@nEVH5150: Amp and cab author cannot be edited after a profile is stored after refinement.
This is to make sure that the authorship of a profile remains clearly identifiable.
I see. That makes sense. What if I change the author name in my Kemper rack (will this change these subsequent profiles, or only profiles created after the change?)
Cheers.
Since the new version of RigManager isn't out yet... I'm wondering why I can't edit the 'Amp Author' or 'Cabinet Author' fields on the current version (can edit 'Rig Author' just fine - but not the other 2...! Is there a way of doing so?)
Thanks for the idea, However, I may decide to run an Eventide H9 Max in the loop if the Kemper FX don't seem to improve in my eyes...!
Can you run a TRS cable from Monitor Out to a stereo power amp and split the stereo signal from there perhaps....?
Appreciate the advice fellas... Perhaps I'll consider Yammy DXR/DSR 12 inch speakers as my lowest budget point then!
Kinda want the monitor to take up as little space as possible and be wedged shaped so I can step all over it and have it pointing at my ears...!
I may may even go through the route of picking up a 3rd party stereo power amp (I have the PowerRack) and using the main outs to the power amp on to PASSIVE units (send one out to a FRFR wedge monitor in-front of me and the other out to a FRFR cabinet behind me in backline; perhaps atomic) + my guitar cabinet from the Speaker Out...!
Though then there would be nothing to send to FOH ? Unless you can use 1 main out to a stereo power amp ? and 1 to FOH ? (Could a stereo unit such as a power amp/FOH mixer split a mono signal into stereo (or 2 mono signals at least?)
