Has anyone used, or seen in person, the Behringer PB1000? It looks like a larger version of the Boss BCB-60.
Bringing the Remote on stage
- y-mun
- Thread is marked as Resolved.
-
-
This is the case I'm looking at at the moment
Just spoke to swan flight case about this and it seems very promising the pedal board base sits flush with the lid and it's covered in carpet for the Velcro to attach to they also said that the board can be unscrewed if you need to attach the pedals to the board by screwing through the board and into where the feet would be. I'm 90% I'm going to order this one
-
One could also go the cheapie route and build your own custom board. All you need is a solid piece of wood for the board and then just get something like a suitcase to put the whole thing into. This way you could get exactly the right fit for the Remote and pedals. It doesn't have to look like crap either, you can paint it, affix velcro (or my personal favourite, pedal board tape, which is so much stronger and requires just a bit to hold on to something very heavy) and add all the foam you like for protection.
It will definitely save you money and will be 100% as functional as the solutions available in the market. Flight cases can also be ordered to size.
-
I was thinking of putting a drawer inside a rack and fill it out with foam so it fits nice and tight.
-
I'm considering the Diago PB03 for the Remote and two expression pedals. Anyone have any experience with them?
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy. -
I'm considering the Diago PB03 for the Remote and two expression pedals. Anyone have any experience with them?
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.I've looked at this also. It looks quite good when he turns the board up side down and the pedal is still stuck to it
-
I'm considering the Diago PB03 for the Remote and two expression pedals. Anyone have any experience with them?
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.Yes, me! I had the tourman (larger version) and it was great. Filled up, it weighed a lot, of course, but my pedals were kept in place perfectly. The carpet came loose after a while due to "abuse" on my end, but Diago sorted that out quickly for me. Great support and a great product.
-
Thanks, Laurens! Looks like a good option.
-
I managed to bag a bargain from ebay today a really well made pedal board/case for £65 including delivery, it lets you take the board out of the case if you don't want to use it in the case and its all Velcro'd up ready to go. I'll post pictures when it arrives
-
I managed to bag a bargain from ebay today a really well made pedal board/case for £65 including delivery, it lets you take the board out of the case if you don't want to use it in the case and its all Velcro'd up ready to go. I'll post pictures when it arrives
Cool! New or used?
-
Cool! New or used?
Used but doesn't look like it has
-
I was thinking of putting a drawer inside a rack and fill it out with foam so it fits nice and tight.
My thought exactly! I think a regular drawer has enough room even for 2 expression pedals and the cable. Some foam and i'm ready!
-
I'm planning to use a Pedaltrain Jr that I already own. I'll be using one Mission Expression pedal that won't be mounted on the board but will fit into the hard case during transport.
I've never been a fan of Velcro on pedals, and have been using this product for over ten years...
[Blocked Image: http://www.nyteowl.com/0ut/tape.jpg]
One square inch cut into quarters will securely hold a Boss pedal on a wood or metal surface. Naturally, larger pieces for larger items. Use a flat blade screwdriver to pry the pedal off and the tape peels off all surfaces easily leaving no residue. -
I ordered a Diago PB03 hardcase in preparation for my Remote, and today I can finally test it with two Yamaha FC7 pedals alongside.
[Blocked Image: http://i.imgur.com/zHSxkDw.jpg]
This is how it looks from the outside.
[Blocked Image: http://i.imgur.com/PDa1sHW.jpg]
Solid, quite heavy, very usable I think (but I'll have to test it during rehearsals and gigs of course).
-
Nice!
Cheers,
Sam -
Here is mine. This is made from a Line 6 FBV board that's still available from Thomann. Note that the ethernet cable is not the Neutrik one supplied by Kemper. My neutrik cable is at the rehearsal room.
[Blocked Image: http://www.bilder-hochladen.net/files/thumbs/i62h-a-d3d9.jpg]
-
Here is mine, this is a flight case I got for a bargain of £65 off eBay. I love that the board inside can be taken out to be used or left inside. Very strong and protects my pedals well. The foam holds them nice and tight inside.
-
I ordered a Diago PB03 hardcase in preparation for my Remote, and today I can finally test it with two Yamaha FC7 pedals alongside..
I have one of those, but they have way too much travel for me. I can' t use them for wah wah.
How are you adjusting to them? -
Quick question to you lucky guys as I've got some time to wait for mine but I am planning the changes required to my rack. Is the Ethernet cable supply Ethercon at both ends?
-
Quick question to you lucky guys as I've got some time to wait for mine but I am planning the changes required to my rack. Is the Ethernet cable supply Ethercon at both ends?
No. At one end only.